Ignition Problems on a Vespa

Ignition on Vespa also affected the rate of the engine could even be that the motor can not live you know, starters disk ignition problems usually found in costumes platinum are not right , it could be one ignition devices such as spark plugs, coils , platinum , condenser, ignition coil are no longer suitable to be used in or out

Check the coil. Coil is suitable for use if konsletkan ignite spark plug wires with the engine at a distance of approximately 5-8 mm is a burst of blue sparks fire or explode if berwarana not blue, but red flame, this means costumes platinum is not true or that the coil is already weak , burst fire the coil directly affected by the costumes of platinum.

Check Platina . Setting the correct platinum renggangan distance between less and more connector is about 0.5 mm with a screwdriver min , note that not in sync , and it hits the platinum mepersingkat life because the connector is not straight or twisted . Stepping platinum occurs also associated with the condition of the condenser .

Check the condenser. Examination of the capacitor is very easy when a fire is platinum , is that the capacitors have been inadequate , replace the capacitor or is there another way to graft condenser condenser systems or capacitor in a double with the same size of the capacitor is 2 farads .

The latter controls the ignition reel [ image above condenser ] , still worth taking or should be replaced by a new one, a sign of faulty ignition coil , bobbin usually blisters, loose coil reels , piston broke. If everything is stable, then you should check the nap or the accuracy of the pur ignition but before checking the state of the magnetic spi broken or not , check the status of the rotor , being good or not , the size should be 21 degrees pur nap before the point of death or the condition of the shaft above the piston head .